Regardless for your personal security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functioning is imperative. Indeed, bulbs are wearing parts that will obviously burn out with time and therefore need to be changed. You’re likely on this website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Dodge Challenger, we’ve created this content page to help you do it without help and not have to go to your auto mechanic. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Dodge Challenger and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-dodge-challenger

How to recognize if the front turn signal bulb on your Dodge Challenger is burnt out or needs to be swapped out?

When you drive your vehicle you don’t constantly have the possibility to examine all the security features of your Dodge Challenger. Indeed, you are most of the time in a rush and tend to get into your vehicle, make your trip and put it down right away without taking the time to do an regular check-up. It is as a result important to take the time to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Dodge Challenger, but that you didn’t become aware of it. Here are the two simple techniques to control if a front turn signal is burnt out or if you need to change it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functioning.
  • By listening to the sound of your blinkers. Indeed, there is an audible signal on each car that signals you of a front turn indicator bulb burnt out on your Dodge Challenger, you will notice that the time between each “click” is much shorter, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual control as on the first solution shown previously.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t hesitate to browse our articles to help you to accomplish this substitution.

Changing the front turn signal bulb on your Dodge Challenger

Now let’s go to the main step of this content page, how to change the front turn signal bulb of your Dodge Challenger? Take note that this technique is quite easy, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Dodge Challenger. If it is a bulb on your rear turn signal, see our dedicated content page. However, here are the details of the steps to follow in order to accomplish this act efficiently depending on the approach you wish to adopt.

Replace front turn signal bulb on your Dodge Challenger through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Dodge Challenger by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.
  • Replace the front turn signal bulb of your Dodge Challenger through the wheel arch:

    This tactic is specifically practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Dodge Challenger through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will explain them now:

    • Put your Dodge Challenger on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be fragile.
    • Take off your headlight block and change the front turn indicator bulb of your Dodge Challenger following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you need more tutorials on the Dodge Challenger, go to our Dodge Challenger category.