It doesn’t matter if for your personal security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always operational is imperative. In fact, bulbs are wearing parts that will obviously burn out in the future and therefore need to be swapped out. You’re probably in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Dacia Logan, we’ve written and published this content page to help you do it all on your own and not have to go to your auto mechanic. In a first section, we will examine the checking a burnt-out front turn signal bulb on your Dacia Logan and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-dacia-logan

How to recognise if the front turn signal bulb on your Dacia Logan is burnt out or needs to be swapped out?

When you drive your car you don’t constantly have the opportunity to verify all the security components of your Dacia Logan. In fact, you are in general in a rush and tend to enter into your car, make your trip and put it down right away without taking the time to do an occasional check-up. It is as a result fundamental to take the time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Dacia Logan, but that you didn’t become aware of it. Here are the two simple options to examine if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functional.
  • By hearing to the sound of your blinkers. In fact, there is an audible signal on each car that signals you of a front turn indicator bulb burnt out on your Dacia Logan, you will notice that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual examine as on the first procedure shown earlier mentioned.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to accomplish this replacement.

Replacing the front turn signal bulb on your Dacia Logan

Now let’s go to the most significant section of this content page, how to change the front turn signal bulb of your Dacia Logan? Take note that this operation is uncomplicated, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Dacia Logan. If it is a bulb on your rear turn signal, see our specific content page. Nevertheless, here are the details of the actions to follow to be able to accomplish this action accurately dependant on the approach you wish to adopt.

Change front turn signal bulb on your Dacia Logan through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Dacia Logan by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb operates.
  • Change the front turn signal bulb of your Dacia Logan through the wheel arch:

    This procedure is particularly effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Dacia Logan through the bumper:

    On some years or finishes, according to the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them right now:

    • Put your Dacia Logan on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take out your headlight block and replace the front turn indicator bulb of your Dacia Logan following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To get more tips on the Dacia Logan, take a look at the Dacia Logan category.