Regardless whether for your personal security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always working is important. In fact, bulbs are wearing parts that will predictably burn out after some time and therefore need to be replaced. You’re most likely in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Citroen Jumper, we’ve created this content to help you do it without hiring somebody and not have to go to your technician. In a first part, we will have a look at controling a burnt-out front turn signal bulb on your Citroen Jumper and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-citroen-jumper

How to know if the front turn signal bulb on your Citroen Jumper is burnt out or needs to be swapped out?

When you drive your vehicle you don’t always have the possibility to examine all the security features of your Citroen Jumper. In fact, you are in general in a hurry and tend to enter into your vehicle, make your journey and put it down immediately without taking the time to do an unexpected check-up. It is therefore crucial to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Citroen Jumper, but that you didn’t detect it. Here are the two simple ways to check if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your blinkers. In fact, there is an audible indication on each car that signals you of a front turn indicator bulb burnt out on your Citroen Jumper, you will perceive that the time between each “click” is much shorter, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to examine and make sure which one is burnt out by a visual check as on the first technique shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our blog posts to help you to carry out this replacement.

Changing the front turn signal bulb on your Citroen Jumper

Now let’s go to the most significant part of this content, how to change the front turn signal bulb of your Citroen Jumper? Take note that this task is uncomplicated, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Citroen Jumper. If it is a bulb on your rear turn signal, see our specific content. On the other hand, here are the details of the steps to stick to to be able to perform this act properly depending on the strategy you desire to adopt.

Replace front turn signal bulb on your Citroen Jumper through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Citroen Jumper by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb is effective.
  • Replace the front turn signal bulb of your Citroen Jumper through the wheel arch:

    This tactic is extremely practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Citroen Jumper through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them right now:

    • Put your Citroen Jumper on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be delicate.
    • Take away your headlight block and swap the front turn indicator bulb of your Citroen Jumper following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To get more tips on the Citroen Jumper, take a look at the Citroen Jumper category.