Regardless whether for your own security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functional is necessary. In fact, bulbs are wearing parts that will predictably burn out after awhile and consequently need to be replaced. You’re perhaps here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Chrysler Town & Country, we’ve created this document to help you do it all on your own and not have to go to your repair shop. In a first step, we will take a look at the checking a burnt-out front turn signal bulb on your Chrysler Town & Country and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-chrysler-town-&-country

How to find out if the front turn signal bulb on your Chrysler Town & Country is burnt out or needs to be changed?

When you drive your automobile you don’t constantly have the possibility to verify all the security components of your Chrysler Town & Country. In fact, you are frequently in a hurry and tend to get into your automobile, make your journey and put it down right away without taking the time to do an occasional check-up. It is therefore relevant to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Chrysler Town & Country, but that you didn’t become aware of it. Here are the two simple solutions to check if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your blinkers. In fact, there is an audible indication on each car that warns you of a front turn indicator bulb burnt out on your Chrysler Town & Country, you will find out that the time between each “click” is much shorter, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual check as on the first solution shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to browse our articles to help you to complete this substitution.

Replacing the front turn signal bulb on your Chrysler Town & Country

Now let’s go to the most important step of this document, how to replace the front turn signal bulb of your Chrysler Town & Country? Please note that this process is quite simple, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Chrysler Town & Country. If it is a bulb on your rear turn signal, see our specific document. However, here are the details of the simple steps to stick to in order to carry out this action efficiently depending on the technique you wish to adopt.

Change front turn signal bulb on your Chrysler Town & Country through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Chrysler Town & Country by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.
  • Change the front turn signal bulb of your Chrysler Town & Country through the wheel arch:

    This tactic is specifically valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Chrysler Town & Country through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them right now:

    • Put your Chrysler Town & Country on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be delicate.
    • Take away your headlight block and swap the front turn indicator bulb of your Chrysler Town & Country following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To discover more tips on the Chrysler Town & Country, take a look at the Chrysler Town & Country category.