Regardless whether for your personal security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always operational is necessary. In fact, bulbs are wearing parts that will surely burn out as time passes and as a consequence need to be changed. You’re perhaps on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Chevrolet Spark, we’ve created this article content to help you do it alone and independently and not have to go to your technician. In a first section, we will look at the checking a burnt-out front turn signal bulb on your Chevrolet Spark and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-chevrolet-spark

How to know if the front turn signal bulb on your Chevrolet Spark is burnt out or needs to be changed?

When you drive your motor vehicle you don’t constantly have the possibility to verify all the security equipments of your Chevrolet Spark. In fact, you are mostly in a rush and tend to enter into your motor vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is consequently relevant to take the time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Chevrolet Spark, but that you didn’t realize it. Here are the two simple ways to check if a front turn signal is burnt out or if you need to swap it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functional.
  • By listening to the sound of your blinkers. In fact, there is an audible indication on each car that signals you of a front turn indicator bulb burnt out on your Chevrolet Spark, you will recognise that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual check as on the first methodology shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to browse our articles to help you to do this replacement.

Changing the front turn signal bulb on your Chevrolet Spark

Now let’s go to the main section of this article content, how to replace the front turn signal bulb of your Chevrolet Spark? You should be aware that this task is quite simple, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Chevrolet Spark. If it is a bulb on your rear turn signal, see our dedicated article content. Nevertheless, here are the details of the simple steps to stick to in order to carry out this act correctly depending on the approach you want to adopt.

Change front turn signal bulb on your Chevrolet Spark through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Chevrolet Spark by the new one (make sure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb operates.

    • Change the front turn signal bulb of your Chevrolet Spark through the wheel arch:

    This process is especially effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Chevrolet Spark through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will explain them right now:

    • Put your Chevrolet Spark on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be vulnerable.
    • Take out your headlight block and swap the front turn indicator bulb of your Chevrolet Spark following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you need more tutorials on the Chevrolet Spark, go to our Chevrolet Spark category.