Regardless for your personal safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always operational is important. In reality, bulbs are wearing parts that will undoubtedly burn out with time and as a result need to be replaced. You’re almost certainly here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Chevrolet Silverado, we’ve written and published this document to help you do it by yourself and not have to go to your technician. In a first part, we will look at controling a burnt-out front turn signal bulb on your Chevrolet Silverado and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-chevrolet-silverado

How to recognize if the front turn signal bulb on your Chevrolet Silverado is burnt out or needs to be replaced?

When you drive your automobile you don’t always have the opportunity to examine all the safety equipments of your Chevrolet Silverado. In reality, you are most of the time in a hurry and tend to enter into your automobile, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result fundamental to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Chevrolet Silverado, but that you didn’t notice it. Here are the two simple ways to verify if a front turn signal is burnt out or if you need to swap it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are operational.
  • By listening to the sound of your blinkers. In reality, there is an audible indication on each car that informs you of a front turn indicator bulb burnt out on your Chevrolet Silverado, you will find out that the time between each “click” is much closer, this means that you will have to change the front turn signal bulb or before. It’s up to you to examine and check out which one is burnt out by a visual verify as on the first methodology shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our articles to help you to perform this replacement.

Replacing the front turn signal bulb on your Chevrolet Silverado

Now let’s go to the most important part of this document, how to replace the front turn signal bulb of your Chevrolet Silverado? Please be aware that this process is very simple, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Chevrolet Silverado. If it is a bulb on your rear turn signal, see our dedicated document. However, here are the details of the steps to follow to be able to conduct this act properly depending on the method you desire to choose.

Replace front turn signal bulb on your Chevrolet Silverado through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Chevrolet Silverado by the new one (ensure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb is effective.
  • Replace the front turn signal bulb of your Chevrolet Silverado through the wheel arch:

    This technique is specially useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Chevrolet Silverado through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them right now:

    • Put your Chevrolet Silverado on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Take out your headlight block and swap the front turn indicator bulb of your Chevrolet Silverado following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you want more guides on the Chevrolet Silverado, go to our Chevrolet Silverado category.