It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always operational is extremely important. In fact, bulbs are wearing parts that will undoubtedly burn out with time and therefore need to be changed. You’re likely on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Bmw Serie 2 F22, we’ve created this document to help you do it on your own and not have to go to your repair shop. In a first section, we will examine controling a burnt-out front turn signal bulb on your Bmw Serie 2 F22 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-bmw-serie-2-f22

How to find out if the front turn signal bulb on your Bmw Serie 2 F22 is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t always have the opportunity to verify all the safety components of your Bmw Serie 2 F22. In fact, you are most likely in a hurry and tend to enter into your motor vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is as a result essential to take the time to in some cases verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Bmw Serie 2 F22, but that you didn’t detect it. Here are the two simple techniques to control if a front turn signal is burnt out or if you need to replace it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are working.
  • By hearing to the sound of your blinkers. In fact, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Bmw Serie 2 F22, you will recognise that the time between each “click” is much closer, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual control as on the first solution shown previously.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t hesitate to read our blog posts to help you to carry out this substitution.

Replacing the front turn signal bulb on your Bmw Serie 2 F22

Now let’s go to the most essential section of this document, how to change the front turn signal bulb of your Bmw Serie 2 F22? Take note that this task is uncomplicated, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Bmw Serie 2 F22. If it is a bulb on your rear turn signal, see our dedicated document. On the other hand, here are the details of the simple steps to stick to in order to execute this act correctly depending on the method you wish to choose.

Replace front turn signal bulb on your Bmw Serie 2 F22 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Bmw Serie 2 F22 by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.
  • Replace the front turn signal bulb of your Bmw Serie 2 F22 through the wheel arch:

    This tactic is in particular valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Bmw Serie 2 F22 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them right now:

    • Put your Bmw Serie 2 F22 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be fragile.
    • Take out your headlight block and replace the front turn indicator bulb of your Bmw Serie 2 F22 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you want more guides on the Bmw Serie 2 F22, go to our Bmw Serie 2 F22 category.