Whether for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functioning is necessary. Indeed, bulbs are wearing parts that will predictably burn out over time and therefore need to be replaced. You’re quite likely here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Bmw Serie 1 E82, we’ve written and published this article to help you do it alone and independently and not have to go to your repair shop. In a first section, we will examine the checking a burnt-out front turn signal bulb on your Bmw Serie 1 E82 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-bmw-serie-1-e82

How to recognise if the front turn signal bulb on your Bmw Serie 1 E82 is burnt out or needs to be changed?

When you drive your motor vehicle you don’t constantly have the possibility to verify all the security equipments of your Bmw Serie 1 E82. Indeed, you are nearly always in a rush and tend to enter into your motor vehicle, make your journey and put it down instantly without taking the time to do an unexpected check-up. It is as a consequence relevant to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Bmw Serie 1 E82, but that you didn’t become aware of it. Here are the two simple ways to verify if a front turn signal is burnt out or if you need to change it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are operational.
  • By hearing to the sound of your blinkers. Indeed, there is an audible sign on each car that signals you of a front turn indicator bulb burnt out on your Bmw Serie 1 E82, you will recognize that the time between each “click” is much shorter, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual verify as on the first solution shown previously.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to accomplish this replacement.

Changing the front turn signal bulb on your Bmw Serie 1 E82

Now let’s go to the most essential section of this article, how to change the front turn signal bulb of your Bmw Serie 1 E82? Please be aware that this procedure is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Bmw Serie 1 E82. If it is a bulb on your rear turn signal, see our special article. On the other hand, here are the details of the steps to stick to to be able to conduct this act correctly dependant on the technique you wish to adopt.

Replace front turn signal bulb on your Bmw Serie 1 E82 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Bmw Serie 1 E82 by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.
  • Replace the front turn signal bulb of your Bmw Serie 1 E82 through the wheel arch:

    This technique is particularly practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Bmw Serie 1 E82 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them right now:

    • Put your Bmw Serie 1 E82 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be fragile.
    • Take away your headlight block and change the front turn indicator bulb of your Bmw Serie 1 E82 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you need more tutorials on the Bmw Serie 1 E82, go to our Bmw Serie 1 E82 category.