It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always operational is necessary. In reality, bulbs are wearing parts that will definitely burn out with time and therefore need to be swapped out. You’re probably on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Audi Rs6, we’ve created this content to help you do it on your own and not have to go to your auto technician. In a first part, we will examine controling a burnt-out front turn signal bulb on your Audi Rs6 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-audi-rs6

How to know if the front turn signal bulb on your Audi Rs6 is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t always have the opportunity to check all the safety features of your Audi Rs6. In reality, you are often in a hurry and tend to get into your motor vehicle, make your trip and put it down instantly without taking the time to do an unexpected check-up. It is as a consequence important to take the time to in some cases check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Audi Rs6, but that you didn’t detect it. Here are the two simple solutions to examine if a front turn signal is burnt out or if you need to change it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By hearing to the sound of your blinkers. In reality, there is an audible signal on each car that signals you of a front turn indicator bulb burnt out on your Audi Rs6, you will identify that the time between each “click” is much closer, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual examine as on the first process shown above.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our blog posts to help you to do this replacing.

Replacing the front turn signal bulb on your Audi Rs6

Now let’s go to the most significant part of this content, how to change the front turn signal bulb of your Audi Rs6? Please note that this process is quite simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Audi Rs6. If it is a bulb on your rear turn signal, see our dedicated content. However, here are the details of the steps to follow to be able to conduct this act accurately dependant on the method you want to choose.

Change front turn signal bulb on your Audi Rs6 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Audi Rs6 by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.

    • Change the front turn signal bulb of your Audi Rs6 through the wheel arch:

    This process is extremely useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Audi Rs6 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will detail them now:

    • Put your Audi Rs6 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be delicate.
    • Take out your headlight block and change the front turn indicator bulb of your Audi Rs6 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    Whenever you have any additional questions about the Audi Rs6, do not hesitate to consult our Audi Rs6 category.