Regardless for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functional is very important. In reality, bulbs are wearing parts that will inevitably burn out over the years and as a result need to be changed. You’re probably on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Audi Q8, we’ve written this document to help you do it by yourself and not have to go to your auto technician. In a first section, we will take a look at the checking a burnt-out front turn signal bulb on your Audi Q8 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-audi-q8

How to recognize if the front turn signal bulb on your Audi Q8 is burnt out or needs to be changed?

When you drive your car you don’t constantly have the opportunity to verify all the safety equipments of your Audi Q8. In reality, you are mostly in a rush and tend to enter into your car, make your trip and put it down immediately without taking the time to do an occasional check-up. It is therefore fundamental to take the time to sometimes verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Audi Q8, but that you didn’t realize it. Here are the two simple ways to verify if a front turn signal is burnt out or if you need to swap it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functioning.
  • By hearing to the sound of your blinkers. In reality, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Audi Q8, you will notice that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check out which one is burnt out by a visual verify as on the first solution shown previously.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to read our content articles to help you to accomplish this replacement.

Replacing the front turn signal bulb on your Audi Q8

Now let’s go to the main section of this document, how to replace the front turn signal bulb of your Audi Q8? Please note that this process is fairly simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Audi Q8. If it is a bulb on your rear turn signal, see our specific document. Nevertheless, here are the details of the simple steps to stick to to be able to accomplish this act properly depending on the technique you wish to choose.

Replace front turn signal bulb on your Audi Q8 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Audi Q8 by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Audi Q8 through the wheel arch:

    This methodology is extremely effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Audi Q8 through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them now:

    • Put your Audi Q8 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be fragile.
    • Take out your headlight block and swap the front turn indicator bulb of your Audi Q8 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you need more guides on the Audi Q8, go to our Audi Q8 category.