Regardless for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functional is imperative. In reality, bulbs are wearing parts that will undoubtedly burn out over the years and as a consequence need to be swapped out. You’re probably on this site because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Audi Q3, we’ve made this article to help you do it by yourself and not have to go to your repair shop. In a first step, we will take a look at the checking a burnt-out front turn signal bulb on your Audi Q3 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-audi-q3

How to know if the front turn signal bulb on your Audi Q3 is burnt out or needs to be replaced?

When you drive your automobile you don’t always have the possibility to examine all the safety equipments of your Audi Q3. In reality, you are often in a hurry and tend to get into your automobile, make your trip and put it down instantly without taking the time to do an regular check-up. It is therefore important to take the time to in some cases examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Audi Q3, but that you didn’t become aware of it. Here are the two simple methods to check if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functional.
  • By listening to the sound of your blinkers. In reality, there is an audible sign on each car that warns you of a front turn indicator bulb burnt out on your Audi Q3, you will recognize that the time between each “click” is much closer, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to examine and examine which one is burnt out by a visual check as on the first procedure shown above.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t be reluctant to read our content articles to help you to accomplish this replacement.

Changing the front turn signal bulb on your Audi Q3

Now let’s go to the most essential step of this article, how to change the front turn signal bulb of your Audi Q3? You should be aware that this procedure is quite easy, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Audi Q3. If it is a bulb on your rear turn signal, see our dedicated article. However, here are the details of the actions to follow to be able to carry out this act accurately according to the approach you want to adopt.

Replace front turn signal bulb on your Audi Q3 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Audi Q3 by the new one (make certain to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb operates.
  • Replace the front turn signal bulb of your Audi Q3 through the wheel arch:

    This tactic is in particular valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Audi Q3 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will explain them right now:

    • Put your Audi Q3 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be vulnerable.
    • Take out your headlight block and change the front turn indicator bulb of your Audi Q3 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    Whenever you have any additional questions about the Audi Q3, do not hesitate to consult our Audi Q3 category.