Regardless for your own security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always operational is necessary. In reality, bulbs are wearing parts that will surely burn out after awhile and as a result need to be changed. You’re perhaps on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Audi A1, we’ve made this content to help you do it all on your own and not have to go to your technician. In a first section, we will take a look at the checking a burnt-out front turn signal bulb on your Audi A1 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-audi-a1

How to know if the front turn signal bulb on your Audi A1 is burnt out or needs to be changed?

When you drive your motor vehicle you don’t always have the opportunity to verify all the security components of your Audi A1. In reality, you are frequently in a hurry and tend to get into your motor vehicle, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore fundamental to take the time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Audi A1, but that you didn’t detect it. Here are the two simple techniques to verify if a front turn signal is burnt out or if you need to swap it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functional.
  • By listening to the sound of your blinkers. In reality, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Audi A1, you will find out that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual verify as on the first process shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our blog posts to help you to accomplish this substitution.

Replacing the front turn signal bulb on your Audi A1

Now let’s go to the most important section of this content, how to change the front turn signal bulb of your Audi A1? Please note that this procedure is quite simple, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Audi A1. If it is a bulb on your rear turn signal, see our special content. On the other hand, here are the details of the guidelines to stick to to be able to conduct this action correctly depending on the strategy you desire to choose.

Change front turn signal bulb on your Audi A1 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Audi A1 by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Audi A1 through the wheel arch:

    This procedure is extremely valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Audi A1 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them now:

    • Put your Audi A1 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be delicate.
    • Remove your headlight block and swap the front turn indicator bulb of your Audi A1 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you wish more guides on the Audi A1, go to our Audi A1 category.