Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle guilty – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your volvo xc70? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your volvo xc70.
Why adjust the headlights of your volvo xc70?
So let’s begin our article with the interest of adjusting the headlights of your volvo xc70. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Sadly this is not always the case and checking this setting, either because the headlights on your volvo xc70 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your volvo xc70 for safety
To begin with, the headlight adjustment of a volvo xc70 must be made for a basic security explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your volvo xc70 . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a volvo xc70 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a volvo xc70?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his volvo xc70? This setting may appear a bit complicated, but by simply following the guidance you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a volvo xc70
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his volvo xc70
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your volvo xc70 (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your volvo xc70 is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your volvo xc70, please browse our article on this subject matter.
If you need more tutorials on the volvo xc70, go to our volvo xc70 category.
