If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle guilty – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Volkswagen Transporter? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Transporter.
Why adjust the headlights of your Volkswagen Transporter?
So let’s begin our content page with the interest of adjusting the headlights of your Volkswagen Transporter. For many of us, our headlights are adjusted well enough, and they appear to light up enough after dark. Regrettably this is not constantly the circumstance and looking at this setting, either because the headlights on your Volkswagen Transporter are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen Transporter for safety
To begin with, the headlight adjustment of a Volkswagen Transporter must be done for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen Transporter . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Transporter for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Transporter?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Volkswagen Transporter? This setting might seem a bit complicated, but by following the guidelines you should be able to perform it without too much trouble.
Preparations to adjust the headlights of a Volkswagen Transporter
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Transporter
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Volkswagen Transporter (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Volkswagen Transporter is logical, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Transporter, please browse our content page on this subject.
If perhaps you have any additional questions about the Volkswagen Transporter, do not hesitate to consult our Volkswagen Transporter category.
