If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle guilty – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Volkswagen Touran 2? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Touran 2.
Why adjust the headlights of your Volkswagen Touran 2?
So let’s begin our content page with the interest of adjusting the headlights of your Volkswagen Touran 2. For most people, our headlights are adjusted good enough, and they seem to light up enough at night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Volkswagen Touran 2 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen Touran 2 for safety
To begin with, the headlight adjustment of a Volkswagen Touran 2 must be achieved for a very easy security explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Touran 2 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Touran 2 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Touran 2?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Volkswagen Touran 2? This adjustment may appear a bit complicated, but by simply following the guidelines you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Volkswagen Touran 2
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Touran 2
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Volkswagen Touran 2 (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Volkswagen Touran 2 is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Touran 2, please browse our content page on this subject matter.
If you want more guides on the Volkswagen Touran 2, go to our Volkswagen Touran 2 category.
