Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle at fault – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Volkswagen Polo 8? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Polo 8.
Why adjust the headlights of your Volkswagen Polo 8?
So let’s begin our article with the interest of adjusting the headlights of your Volkswagen Polo 8. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough during the night. However this is not constantly the circumstance and looking at this setting, either because the headlights on your Volkswagen Polo 8 are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen Polo 8 for safety
First of all, the headlight adjustment of a Volkswagen Polo 8 must be done for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen Polo 8 . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Polo 8 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Polo 8?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Volkswagen Polo 8? This setting may seem a bit complicated, but by following the guidelines you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Volkswagen Polo 8
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Polo 8
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Volkswagen Polo 8 (they are usually marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Volkswagen Polo 8 is coherent, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Polo 8, please go through our article on this subject matter.
To get more tips on the Volkswagen Polo 8, take a look at the Volkswagen Polo 8 category.
