If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to take responsibility – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Volkswagen Polo 6? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Polo 6.
Why adjust the headlights of your Volkswagen Polo 6?
So let’s begin our content with the interest of adjusting the headlights of your Volkswagen Polo 6. For many of us, our headlights are adjusted good enough, and they seem to light up enough through the night. Unfortunately this is not always the circumstance and checking this setting, either because the headlights on your Volkswagen Polo 6 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen Polo 6 for safety
First of all, the headlight adjustment of a Volkswagen Polo 6 must be conducted for a basic safety motive. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Volkswagen Polo 6 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Polo 6 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Polo 6?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Volkswagen Polo 6? This adjustment may appear a bit complicated, but by following the recommendations you should have the ability to complete it without too much concern.
Preparations to adjust the headlights of a Volkswagen Polo 6
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Polo 6
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Volkswagen Polo 6 (they are usually marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Volkswagen Polo 6 is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Polo 6, please go through our content on this subject.
If you need more guides on the Volkswagen Polo 6, go to our Volkswagen Polo 6 category.
