Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to take responsibility – your headlights, as well known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Volkswagen Polo 3? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Polo 3.
Why adjust the headlights of your Volkswagen Polo 3?
So let’s start our article with the benefit of adjusting the headlights of your Volkswagen Polo 3. For most people, our headlights are adjusted sufficiently, and they appear to light up enough during the night. However this is not always the circumstance and examining this setting, either because the headlights on your Volkswagen Polo 3 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen Polo 3 for safety
First of all, the headlight adjustment of a Volkswagen Polo 3 must be achieved for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Polo 3 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Polo 3 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Polo 3?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Volkswagen Polo 3? This setting may appear a bit complex, but by simply following the guidelines you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Volkswagen Polo 3
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Polo 3
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Volkswagen Polo 3 (they are generally designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Volkswagen Polo 3 is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Polo 3, please go through our article on this subject.
Whenever you have any further questions about the Volkswagen Polo 3, do not hesitate to consult our Volkswagen Polo 3 category.
