If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car responsible – your headlights, also often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Volkswagen Multivan? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Multivan.

adjust-headlights-volkswagen-multivan

Why adjust the headlights of your Volkswagen Multivan?

So let’s start our content page with the interest of adjusting the headlights of your Volkswagen Multivan. For most people, our headlights are adjusted good enough, and they seem to light up enough at night. Sadly this is not always the circumstance and examining this setting, either because the headlights on your Volkswagen Multivan are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Volkswagen Multivan for safety

First of all, the headlight adjustment of a Volkswagen Multivan must be achieved for a basic safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Multivan . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Volkswagen Multivan for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Volkswagen Multivan?

We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Volkswagen Multivan? This adjustment may seem a bit complicated, but by simply following the recommendations you should have the ability to complete it without too much issue.

Preparations to adjust the headlights of a Volkswagen Multivan

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Volkswagen Multivan

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your hood, locate the screws for horizontal and vertical control of the headlights of your Volkswagen Multivan (they are in general marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Volkswagen Multivan is logical, do not think twice to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Volkswagen Multivan, please read our content page on this subject.

To find more tips on the Volkswagen Multivan, take a look at the Volkswagen Multivan category.