Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle guilty – your headlights, as well identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Volkswagen ID.4? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen ID.4.
Why adjust the headlights of your Volkswagen ID.4?
So let’s begin our article with the benefit of adjusting the headlights of your Volkswagen ID.4. For many people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Regrettably this is not always the circumstance and checking this setting, either because the headlights on your Volkswagen ID.4 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen ID.4 for safety
First of all, the headlight adjustment of a Volkswagen ID.4 must be done for a basic security reason. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen ID.4 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen ID.4 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen ID.4?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Volkswagen ID.4? This adjustment may appear a bit complicated, but by following the recommendations you should be able to complete it without too much concern.
Preparations to adjust the headlights of a Volkswagen ID.4
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen ID.4
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Volkswagen ID.4 (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Volkswagen ID.4 is logical, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen ID.4, please go through our article on this subject.
If you need more tutorials on the Volkswagen ID.4, go to our Volkswagen ID.4 category.
