Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car to take responsibility – your headlights, as well named high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Volkswagen Fox? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Fox.
Why adjust the headlights of your Volkswagen Fox?
So let’s begin our article with the interest of adjusting the headlights of your Volkswagen Fox. For most of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Volkswagen Fox are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen Fox for safety
First of all, the headlight adjustment of a Volkswagen Fox must be carried out for a simple safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Fox . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Fox for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Fox?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Volkswagen Fox? This setting may appear a bit complicated, but by following the instructions you should be able to do it without too much problem.
Preparations to adjust the headlights of a Volkswagen Fox
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Fox
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Volkswagen Fox (they are in general designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Volkswagen Fox is logical, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Fox, please go through our article on this subject matter.
To find more tips on the Volkswagen Fox, take a look at the Volkswagen Fox category.
