If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car responsible – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Volkswagen Eos? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Eos.
Why adjust the headlights of your Volkswagen Eos?
So let’s begin our content with the benefit of adjusting the headlights of your Volkswagen Eos. For most people, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Volkswagen Eos are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen Eos for safety
To begin with, the headlight adjustment of a Volkswagen Eos must be finished for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Volkswagen Eos . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Eos for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Eos?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Volkswagen Eos? This setting might seem a bit complicated, but by following the recommendations you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Volkswagen Eos
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Eos
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Volkswagen Eos (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Volkswagen Eos is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Eos, please browse our content on this subject.
If perhaps you have any additional questions about the Volkswagen Eos, do not hesitate to consult our Volkswagen Eos category.
