If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car guilty – your headlights, as well called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Volkswagen Coccinelle? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Coccinelle.
Why adjust the headlights of your Volkswagen Coccinelle?
So let’s start our article with the interest of adjusting the headlights of your Volkswagen Coccinelle. For most people, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Regrettably this is not always the case and examining this setting, either because the headlights on your Volkswagen Coccinelle are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen Coccinelle for safety
To begin with, the headlight adjustment of a Volkswagen Coccinelle must be achieved for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen Coccinelle . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Coccinelle for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Coccinelle?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Volkswagen Coccinelle? This adjustment may appear a bit complicated, but by simply following the recommendations you should be able to complete it without too much concern.
Preparations to adjust the headlights of a Volkswagen Coccinelle
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Coccinelle
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Volkswagen Coccinelle (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Volkswagen Coccinelle is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Coccinelle, please go through our article on this subject.
To find more tips on the Volkswagen Coccinelle, take a look at the Volkswagen Coccinelle category.
