Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car guilty – your headlights, also often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Volkswagen California? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen California.
Why adjust the headlights of your Volkswagen California?
So let’s begin our content with the benefit of adjusting the headlights of your Volkswagen California. For many people, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Volkswagen California are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Volkswagen California for safety
First of all, the headlight adjustment of a Volkswagen California must be finished for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Volkswagen California . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volkswagen California for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen California?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Volkswagen California? This setting may seem a bit complex, but by following the guidance you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Volkswagen California
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen California
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Volkswagen California (they are usually designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Volkswagen California is coherent, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Volkswagen California, please read our content on this subject matter.
If you wish more guides on the Volkswagen California, go to our Volkswagen California category.
