Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car guilty – your headlights, as well often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Volkswagen Beetle? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Beetle.

adjust-headlights-volkswagen-beetle

Why adjust the headlights of your Volkswagen Beetle?

So let’s start our content page with the benefit of adjusting the headlights of your Volkswagen Beetle. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Sadly this is not constantly the case and checking this setting, either because the headlights on your Volkswagen Beetle are not bright enough, or because you have the impression that they are too weak is a wise decision .

Adjusting the high beams of your Volkswagen Beetle for safety

To begin with, the headlight adjustment of a Volkswagen Beetle must be conducted for a simple security reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Volkswagen Beetle . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Volkswagen Beetle for legal reasons

In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Volkswagen Beetle?

We will now go forward to the section that concerns you the most in this post, how to adjust the headlights of his Volkswagen Beetle? This setting may seem a bit complex, but by simply following the guidelines you should have the ability to perform it without too much concern.

Preparations to adjust the headlights of a Volkswagen Beetle

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Volkswagen Beetle

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Volkswagen Beetle (they are in most cases marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Volkswagen Beetle is logical, do not think twice to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Volkswagen Beetle, please read our content page on this subject.

If you have any further questions about the Volkswagen Beetle, do not hesitate to consult our Volkswagen Beetle category.