If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to blame – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Volkswagen Arteon? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Arteon.
Why adjust the headlights of your Volkswagen Arteon?
So let’s start our content page with the interest of adjusting the headlights of your Volkswagen Arteon. For most people, our headlights are adjusted well enough, and they seem to light up enough through the night. However this is not constantly the case and checking this setting, either because the headlights on your Volkswagen Arteon are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen Arteon for safety
To begin with, the headlight adjustment of a Volkswagen Arteon must be conducted for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Volkswagen Arteon . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Arteon for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Arteon?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Volkswagen Arteon? This adjustment may appear a bit complicated, but by following the recommendations you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Volkswagen Arteon
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Arteon
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Volkswagen Arteon (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Volkswagen Arteon is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Arteon, please browse our content page on this subject.
In the event that you have any further questions about the Volkswagen Arteon, do not hesitate to consult our Volkswagen Arteon category.
