Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle at fault – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Vauxkhall Moka? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Vauxkhall Moka.

adjust-headlights-vauxkhall-moka

Why adjust the headlights of your Vauxkhall Moka?

So let’s begin our article with the interest of adjusting the headlights of your Vauxkhall Moka. For the majority of us, our headlights are adjusted sufficiently, and they seem to light up enough during the night. Regrettably this is not always the circumstance and checking this setting, either because the headlights on your Vauxkhall Moka are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Vauxkhall Moka for safety

To begin with, the headlight adjustment of a Vauxkhall Moka must be made for a basic safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Vauxkhall Moka . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Vauxkhall Moka for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Vauxkhall Moka?

We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Vauxkhall Moka? This setting might seem a bit difficult, but by simply following the instructions you should have the ability to do it without too much concern.

Preparations to adjust the headlights of a Vauxkhall Moka

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The headlight adjustment of his Vauxkhall Moka

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Vauxkhall Moka (they are usually designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Vauxkhall Moka is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Vauxkhall Moka, please read our article on this subject matter.

To find more tips on the Vauxkhall Moka, take a look at the Vauxkhall Moka category.