Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car guilty – your headlights, as well often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Toyota Verso? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Verso.
Why adjust the headlights of your Toyota Verso?
So let’s start our content with the interest of adjusting the headlights of your Toyota Verso. For many people, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. However this is not constantly the circumstance and examining this setting, either because the headlights on your Toyota Verso are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Toyota Verso for safety
First of all, the headlight adjustment of a Toyota Verso must be finished for a basic security motive. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota Verso . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota Verso for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Verso?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Toyota Verso? This setting may seem a bit complex, but by following the instructions you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Toyota Verso
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Verso
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Toyota Verso (they are in most cases marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Toyota Verso is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Verso, please browse our content on this subject matter.
Whenever you have any further questions about the Toyota Verso, do not hesitate to consult our Toyota Verso category.
