Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to blame – your headlights, also often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Toyota Tundra? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Tundra.

adjust-headlights-toyota-tundra

Why adjust the headlights of your Toyota Tundra?

So let’s start our content with the benefit of adjusting the headlights of your Toyota Tundra. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough during the night. Unfortunately this is not constantly the case and examining this setting, either because the headlights on your Toyota Tundra are not bright enough, or because you have the feeling that they are too weak is a wise decision .

Adjusting the high beams of your Toyota Tundra for safety

First of all, the headlight adjustment of a Toyota Tundra must be made for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Toyota Tundra . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Toyota Tundra for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Toyota Tundra?

We will now go forward to the section that concerns you the most in this post, how to adjust the headlights of his Toyota Tundra? This setting might seem a bit complicated, but by simply following the recommendations you should be able to accomplish it without too much concern.

Preparations to adjust the headlights of a Toyota Tundra

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Toyota Tundra

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, find the screws for horizontal and vertical modification of the headlights of your Toyota Tundra (they are in most cases marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Toyota Tundra is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Toyota Tundra, please go through our content on this subject matter.

If you want more guides on the Toyota Tundra, go to our Toyota Tundra category.