Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car guilty – your headlights, also called high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Toyota Scion FR S? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Scion FR S.
Why adjust the headlights of your Toyota Scion FR S?
So let’s begin our content page with the interest of adjusting the headlights of your Toyota Scion FR S. For most people, our headlights are adjusted sufficiently, and they appear to light up enough during the night. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Toyota Scion FR S are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Toyota Scion FR S for safety
First of all, the headlight adjustment of a Toyota Scion FR S must be conducted for a basic security explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Toyota Scion FR S . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Scion FR S for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Scion FR S?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Toyota Scion FR S? This setting might seem a bit complex, but by simply following the instructions you should be able to perform it without too much issue.
Preparations to adjust the headlights of a Toyota Scion FR S
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Scion FR S
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Toyota Scion FR S (they are usually marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Toyota Scion FR S is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Toyota Scion FR S, please go through our content page on this subject matter.
To get more tips on the Toyota Scion FR S, take a look at the Toyota Scion FR S category.
