If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to blame – your headlights, also often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Toyota Matrix? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Matrix.
Why adjust the headlights of your Toyota Matrix?
So let’s begin our article with the benefit of adjusting the headlights of your Toyota Matrix. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Toyota Matrix are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Toyota Matrix for safety
To begin with, the headlight adjustment of a Toyota Matrix must be done for a simple security explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Toyota Matrix . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Matrix for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Matrix?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Toyota Matrix? This adjustment may seem a bit complex, but by following the guidelines you should be able to complete it without too much concern.
Preparations to adjust the headlights of a Toyota Matrix
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Matrix
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Toyota Matrix (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Toyota Matrix is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Toyota Matrix, please browse our article on this subject matter.
In the event that you have any further questions about the Toyota Matrix, do not hesitate to consult our Toyota Matrix category.
