Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car to take responsibility – your headlights, also called high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Toyota Land Cruiser Serie 90? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Land Cruiser Serie 90.
Why adjust the headlights of your Toyota Land Cruiser Serie 90?
So let’s start our article with the interest of adjusting the headlights of your Toyota Land Cruiser Serie 90. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Toyota Land Cruiser Serie 90 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Toyota Land Cruiser Serie 90 for safety
First of all, the headlight adjustment of a Toyota Land Cruiser Serie 90 must be made for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Toyota Land Cruiser Serie 90 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Land Cruiser Serie 90 for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Land Cruiser Serie 90?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Toyota Land Cruiser Serie 90? This adjustment may seem a bit difficult, but by following the instructions you should be able to perform it without too much concern.
Preparations to adjust the headlights of a Toyota Land Cruiser Serie 90
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Land Cruiser Serie 90
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Toyota Land Cruiser Serie 90 (they are generally designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Toyota Land Cruiser Serie 90 is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Land Cruiser Serie 90, please read our article on this subject.
If you wish more guides on the Toyota Land Cruiser Serie 90, go to our Toyota Land Cruiser Serie 90 category.
