Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car responsible – your headlights, as well identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Toyota Hilux? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Hilux.
Why adjust the headlights of your Toyota Hilux?
So let’s begin our content page with the interest of adjusting the headlights of your Toyota Hilux. For many people, our headlights are adjusted well enough, and they appear to light up enough after dark. Sadly this is not always the case and looking at this setting, either because the headlights on your Toyota Hilux are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Toyota Hilux for safety
To begin with, the headlight adjustment of a Toyota Hilux must be done for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Toyota Hilux . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Hilux for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Hilux?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Toyota Hilux? This adjustment may seem a bit difficult, but by following the instructions you should have the ability to accomplish it without too much problem.
Preparations to adjust the headlights of a Toyota Hilux
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Hilux
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Toyota Hilux (they are in general marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Toyota Hilux is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Toyota Hilux, please read our content page on this subject matter.
If perhaps you have any additional questions about the Toyota Hilux, do not hesitate to consult our Toyota Hilux category.
