If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle responsible – your headlights, as well often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Toyota Highlander? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Highlander.
Why adjust the headlights of your Toyota Highlander?
So let’s start our content with the interest of adjusting the headlights of your Toyota Highlander. For most of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Toyota Highlander are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Toyota Highlander for safety
First of all, the headlight adjustment of a Toyota Highlander must be made for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota Highlander . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Highlander for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Highlander?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Toyota Highlander? This setting may seem a bit difficult, but by simply following the guidance you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Toyota Highlander
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Highlander
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Toyota Highlander (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Toyota Highlander is logical, do not think twice to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Toyota Highlander, please read our content on this subject.
To discover more tips on the Toyota Highlander, take a look at the Toyota Highlander category.
