If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car to blame – your headlights, also often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Toyota FJ Cruiser? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota FJ Cruiser.
Why adjust the headlights of your Toyota FJ Cruiser?
So let’s begin our content page with the benefit of adjusting the headlights of your Toyota FJ Cruiser. For most of us, our headlights are adjusted good enough, and they appear to light up enough during the night. Regrettably this is not always the case and looking at this setting, either because the headlights on your Toyota FJ Cruiser are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Toyota FJ Cruiser for safety
First of all, the headlight adjustment of a Toyota FJ Cruiser must be finished for a basic security explanation. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota FJ Cruiser . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota FJ Cruiser for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota FJ Cruiser?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Toyota FJ Cruiser? This adjustment may seem a bit complicated, but by following the guidelines you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Toyota FJ Cruiser
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota FJ Cruiser
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Toyota FJ Cruiser (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Toyota FJ Cruiser is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Toyota FJ Cruiser, please go through our content page on this subject matter.
Whenever you have any additional questions about the Toyota FJ Cruiser, do not hesitate to consult our Toyota FJ Cruiser category.
