Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car guilty – your headlights, also called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Toyota C HR? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota C HR.

adjust-headlights-toyota-c-hr

Why adjust the headlights of your Toyota C HR?

So let’s start our content page with the interest of adjusting the headlights of your Toyota C HR. For most people, our headlights are adjusted good enough, and they appear to light up enough through the night. However this is not always the case and looking at this setting, either because the headlights on your Toyota C HR are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Toyota C HR for safety

First of all, the headlight adjustment of a Toyota C HR must be achieved for a basic security explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Toyota C HR . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Toyota C HR for legal reasons

Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Toyota C HR?

We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Toyota C HR? This setting may appear a bit complex, but by following the guidance you should be able to do it without too much trouble.

Preparations to adjust the headlights of a Toyota C HR

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Toyota C HR

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Toyota C HR (they are in general designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Toyota C HR is logical, do not hesitate to verify it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Toyota C HR, please read our content page on this subject.

If you want more tutorials on the Toyota C HR, go to our Toyota C HR category.