If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, also known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Toyota C-hr? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota C-hr.

adjust-headlights-toyota-c-hr

Why adjust the headlights of your Toyota C-hr?

So let’s start our content with the interest of adjusting the headlights of your Toyota C-hr. For most people, our headlights are adjusted sufficiently, and they seem to light up enough during the night. However this is not constantly the case and checking this setting, either because the headlights on your Toyota C-hr are not bright enough, or because you have the feeling that they are too weak is a wise decision .

Adjusting the high beams of your Toyota C-hr for safety

First of all, the headlight adjustment of a Toyota C-hr must be made for a simple safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Toyota C-hr . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Toyota C-hr for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Toyota C-hr?

We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Toyota C-hr? This setting might seem a bit complex, but by simply following the recommendations you should have the ability to complete it without too much issue.

Preparations to adjust the headlights of a Toyota C-hr

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Toyota C-hr

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Toyota C-hr (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Toyota C-hr is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Toyota C-hr, please browse our content on this subject.

If perhaps you have any additional questions about the Toyota C-hr, do not hesitate to consult our Toyota C-hr category.