Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, as well known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Toyota Aygo? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Aygo.
Why adjust the headlights of your Toyota Aygo?
So let’s start our article with the benefit of adjusting the headlights of your Toyota Aygo. For most people, our headlights are adjusted well enough, and they appear to light up enough after dark. Sadly this is not constantly the circumstance and examining this setting, either because the headlights on your Toyota Aygo are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Toyota Aygo for safety
To begin with, the headlight adjustment of a Toyota Aygo must be done for a basic security reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Toyota Aygo . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota Aygo for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Aygo?
We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Toyota Aygo? This adjustment may seem a bit complex, but by simply following the recommendations you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Toyota Aygo
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Aygo
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Toyota Aygo (they are in most cases marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Toyota Aygo is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Toyota Aygo, please read our article on this subject.
If you have any further questions about the Toyota Aygo, do not hesitate to consult our Toyota Aygo category.
