If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle to take responsibility – your headlights, also named high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Toyota Aygo 2? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Aygo 2.

adjust-headlights-toyota-aygo-2

Why adjust the headlights of your Toyota Aygo 2?

So let’s begin our article with the interest of adjusting the headlights of your Toyota Aygo 2. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Toyota Aygo 2 are not bright enough, or because you have the feeling that they are too weak is a great idea .

Adjusting the high beams of your Toyota Aygo 2 for safety

First of all, the headlight adjustment of a Toyota Aygo 2 must be made for a very easy safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Toyota Aygo 2 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Toyota Aygo 2 for legal reasons

Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Toyota Aygo 2?

We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Toyota Aygo 2? This adjustment may appear a bit complicated, but by simply following the instructions you should have the ability to do it without too much trouble.

Preparations to adjust the headlights of a Toyota Aygo 2

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The headlight adjustment of his Toyota Aygo 2

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Toyota Aygo 2 (they are usually marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Toyota Aygo 2 is logical, do not hesitate to verify it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Toyota Aygo 2, please go through our article on this subject matter.

Whenever you have any additional questions about the Toyota Aygo 2, do not hesitate to consult our Toyota Aygo 2 category.