Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle guilty – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Toyota Avensis? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Avensis.
Why adjust the headlights of your Toyota Avensis?
So let’s start our article with the benefit of adjusting the headlights of your Toyota Avensis. For most of us, our headlights are adjusted well enough, and they seem to light up enough at night. Sadly this is not always the case and examining this setting, either because the headlights on your Toyota Avensis are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Toyota Avensis for safety
To begin with, the headlight adjustment of a Toyota Avensis must be finished for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota Avensis . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Avensis for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Avensis?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Toyota Avensis? This setting might seem a bit complicated, but by simply following the guidance you should have the ability to complete it without too much concern.
Preparations to adjust the headlights of a Toyota Avensis
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Avensis
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Toyota Avensis (they are usually designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Toyota Avensis is logical, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Toyota Avensis, please go through our article on this subject.
If you need more guides on the Toyota Avensis, go to our Toyota Avensis category.
