If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car to blame – your headlights, as well identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Toyota Auris? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Auris.
Why adjust the headlights of your Toyota Auris?
So let’s start our content page with the interest of adjusting the headlights of your Toyota Auris. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not constantly the case and looking at this setting, either because the headlights on your Toyota Auris are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Toyota Auris for safety
To begin with, the headlight adjustment of a Toyota Auris must be finished for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Toyota Auris . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota Auris for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Auris?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Toyota Auris? This setting might seem a bit complicated, but by following the instructions you should be able to complete it without too much trouble.
Preparations to adjust the headlights of a Toyota Auris
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Auris
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Toyota Auris (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Toyota Auris is logical, do not think twice to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Toyota Auris, please read our content page on this subject.
To discover more tips on the Toyota Auris, take a look at the Toyota Auris category.
