Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to take responsibility – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Toyota Auris 2? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Auris 2.
Why adjust the headlights of your Toyota Auris 2?
So let’s start our article with the benefit of adjusting the headlights of your Toyota Auris 2. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Sadly this is not always the circumstance and looking at this setting, either because the headlights on your Toyota Auris 2 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Toyota Auris 2 for safety
First of all, the headlight adjustment of a Toyota Auris 2 must be done for a simple safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Toyota Auris 2 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Toyota Auris 2 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Auris 2?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Toyota Auris 2? This adjustment may appear a bit complex, but by simply following the guidance you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Toyota Auris 2
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Auris 2
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Toyota Auris 2 (they are generally marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Toyota Auris 2 is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Toyota Auris 2, please read our article on this subject matter.
To find more tips on the Toyota Auris 2, take a look at the Toyota Auris 2 category.
