If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car responsible – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Tesla Model X? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Tesla Model X.
Why adjust the headlights of your Tesla Model X?
So let’s start our article with the benefit of adjusting the headlights of your Tesla Model X. For most of us, our headlights are adjusted well enough, and they appear to light up enough at night. However this is not always the circumstance and looking at this setting, either because the headlights on your Tesla Model X are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Tesla Model X for safety
First of all, the headlight adjustment of a Tesla Model X must be finished for a basic security reason. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Tesla Model X . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Tesla Model X for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Tesla Model X?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Tesla Model X? This adjustment may seem a bit difficult, but by following the guidance you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Tesla Model X
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Tesla Model X
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Tesla Model X (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Tesla Model X is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Tesla Model X, please read our article on this subject matter.
If perhaps you have any additional questions about the Tesla Model X, do not hesitate to consult our Tesla Model X category.
