Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to take responsibility – your headlights, as well often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Tesla Model 3? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Tesla Model 3.
Why adjust the headlights of your Tesla Model 3?
So let’s start our article with the interest of adjusting the headlights of your Tesla Model 3. For many people, our headlights are adjusted good enough, and they appear to light up enough during the night. Sadly this is not constantly the circumstance and examining this setting, either because the headlights on your Tesla Model 3 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Tesla Model 3 for safety
First of all, the headlight adjustment of a Tesla Model 3 must be done for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Tesla Model 3 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Tesla Model 3 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Tesla Model 3?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Tesla Model 3? This setting may seem a bit complex, but by simply following the recommendations you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Tesla Model 3
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Tesla Model 3
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Tesla Model 3 (they are generally marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Tesla Model 3 is coherent, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Tesla Model 3, please go through our article on this subject matter.
If perhaps you have any additional questions about the Tesla Model 3, do not hesitate to consult our Tesla Model 3 category.
