Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle at fault – your headlights, as well named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Suzuki Sx4? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Suzuki Sx4.
Why adjust the headlights of your Suzuki Sx4?
So let’s start our content with the interest of adjusting the headlights of your Suzuki Sx4. For most of us, our headlights are adjusted good enough, and they appear to light up enough during the night. Regrettably this is not always the circumstance and looking at this setting, either because the headlights on your Suzuki Sx4 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Suzuki Sx4 for safety
To begin with, the headlight adjustment of a Suzuki Sx4 must be made for a basic security explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Suzuki Sx4 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Suzuki Sx4 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Suzuki Sx4?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Suzuki Sx4? This adjustment may seem a bit complex, but by following the guidance you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Suzuki Sx4
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Suzuki Sx4
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Suzuki Sx4 (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Suzuki Sx4 is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Suzuki Sx4, please read our content on this subject.
If perhaps you have any further questions about the Suzuki Sx4, do not hesitate to consult our Suzuki Sx4 category.
