Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car at fault – your headlights, as well identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Suzuki Swift? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Suzuki Swift.
Why adjust the headlights of your Suzuki Swift?
So let’s start our article with the interest of adjusting the headlights of your Suzuki Swift. For many people, our headlights are adjusted well enough, and they seem to light up enough after dark. Unfortunately this is not always the case and checking this setting, either because the headlights on your Suzuki Swift are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Suzuki Swift for safety
First of all, the headlight adjustment of a Suzuki Swift must be achieved for a simple safety motive. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Suzuki Swift . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Suzuki Swift for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Suzuki Swift?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Suzuki Swift? This setting might seem a bit complicated, but by simply following the guidelines you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Suzuki Swift
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Suzuki Swift
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Suzuki Swift (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Suzuki Swift is coherent, do not think twice to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Suzuki Swift, please browse our article on this subject matter.
If perhaps you have any further questions about the Suzuki Swift, do not hesitate to consult our Suzuki Swift category.
