Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car at fault – your headlights, also called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Suzuki Across? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Suzuki Across.
Why adjust the headlights of your Suzuki Across?
So let’s begin our content with the interest of adjusting the headlights of your Suzuki Across. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough during the night. Sadly this is not always the case and checking this setting, either because the headlights on your Suzuki Across are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Suzuki Across for safety
To begin with, the headlight adjustment of a Suzuki Across must be achieved for a very easy safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Suzuki Across . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Suzuki Across for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Suzuki Across?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Suzuki Across? This setting may appear a bit complicated, but by simply following the instructions you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Suzuki Across
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Suzuki Across
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Suzuki Across (they are in most cases designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Suzuki Across is logical, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Suzuki Across, please browse our content on this subject matter.
Whenever you have any further questions about the Suzuki Across, do not hesitate to consult our Suzuki Across category.
