If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car at fault – your headlights, as well called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Skoda Kodiaq? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Skoda Kodiaq.
Why adjust the headlights of your Skoda Kodiaq?
So let’s begin our content with the interest of adjusting the headlights of your Skoda Kodiaq. For many of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Unfortunately this is not always the case and looking at this setting, either because the headlights on your Skoda Kodiaq are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Skoda Kodiaq for safety
First of all, the headlight adjustment of a Skoda Kodiaq must be conducted for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Skoda Kodiaq . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Skoda Kodiaq for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Skoda Kodiaq?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Skoda Kodiaq? This adjustment may seem a bit complex, but by simply following the guidance you should be able to complete it without too much issue.
Preparations to adjust the headlights of a Skoda Kodiaq
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Skoda Kodiaq
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Skoda Kodiaq (they are in general marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Skoda Kodiaq is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Skoda Kodiaq, please browse our content on this subject matter.
To find more tips on the Skoda Kodiaq, take a look at the Skoda Kodiaq category.
