Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car to blame – your headlights, also known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Skoda Kamiq? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Skoda Kamiq.
Why adjust the headlights of your Skoda Kamiq?
So let’s begin our content with the benefit of adjusting the headlights of your Skoda Kamiq. For most of us, our headlights are adjusted good enough, and they seem to light up enough at night. However this is not always the case and looking at this setting, either because the headlights on your Skoda Kamiq are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Skoda Kamiq for safety
To begin with, the headlight adjustment of a Skoda Kamiq must be carried out for a simple security reason. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Skoda Kamiq . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Skoda Kamiq for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Skoda Kamiq?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Skoda Kamiq? This adjustment may appear a bit difficult, but by following the recommendations you should be able to do it without too much problem.
Preparations to adjust the headlights of a Skoda Kamiq
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Skoda Kamiq
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Skoda Kamiq (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Skoda Kamiq is logical, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Skoda Kamiq, please read our content on this subject matter.
If you want more guides on the Skoda Kamiq, go to our Skoda Kamiq category.
