If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car guilty – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Skoda Enyaq? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Skoda Enyaq.


Why adjust the headlights of your Skoda Enyaq?

So let’s begin our content with the interest of adjusting the headlights of your Skoda Enyaq. For most people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not always the case and looking at this setting, either because the headlights on your Skoda Enyaq are not bright enough, or because you have the sensation that they are too weak is a good idea .

Adjusting the high beams of your Skoda Enyaq for safety

To begin with, the headlight adjustment of a Skoda Enyaq must be made for a very easy security reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Skoda Enyaq . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Skoda Enyaq for legal reasons

In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Skoda Enyaq?

We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Skoda Enyaq? This adjustment may appear a bit difficult, but by simply following the recommendations you should be able to perform it without too much trouble.

Preparations to adjust the headlights of a Skoda Enyaq

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Skoda Enyaq

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your hood, find the screws for horizontal and vertical modification of the headlights of your Skoda Enyaq (they are generally designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Skoda Enyaq is logical, do not hesitate to check it after you have driven it, occasionally it may move.

If you want to adjust the fog lights on your Skoda Enyaq, please go through our content on this subject matter.

If perhaps you have any further questions about the Skoda Enyaq, do not hesitate to consult our Skoda Enyaq category.